Table of Contents
Advertisement
To remove the speaker grille
The speaker grilles are removable as shown below:
Projections
To remove the speaker grille, insert your fingers at the top
of the speaker grille, then pull towards you. Do the same at
the bottom.
To attach the speaker grille, put the projections of the
speaker into the holes of the speaker grille.
Connecting Other Equipment
You can connect a cassette deck, etc.—used as a playback
and recording device.
Holes
When you connect the other equipment, refer also to the
manuals supplied with it.
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
Speaker grille
Ex. When connecting a cassette deck
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
• Between the audio output jacks on the cassette deck and
– 8 –
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
To input (REC)
L
R
Ex. Cassette deck
R
L
To output (PLAY)
L
R
R
L
the LINE OUT jacks—For recording on the cassette
deck.
the LINE IN jacks—For playing a tape.
Continued
LINE IN
LINE OUT
Advertisement
Table of Contents
