JVC NX-HD10 Instructions Manual page 44

Compact component hdd system
Hide thumbs Also See for NX-HD10:
Table of Contents

Advertisement

To automatically record CDs—CD Auto Recording
You can automatically make a recording when playing back
a CD entirely (from the first track to the last) in Normal
play. (You need to start playback by pressing CD 3/8.)
The recording will be stored in a library named "Library
CD."
• "AAC 128 kbps" is automatically selected as the
recording format.
• CD Auto Recording will not work for Program play,
Random play, and Repeat play.
• CD Auto Recording will be canceled when Recording
Timer starts operating.
On the unit ONLY:
1
Press AUTO MODE repeatedly until "CD AUTO
REC" appears in the main display.
Ex. When the function is currently turned "OFF"
(initial setting)
• Each time you press the button, Auto Modes change
as follows:
SMART COMP.
Canceled
2
Press SELECT ¢ or SELECT 4 to select "ON?"
3
Press SET to finish the setting.
The CD and AUTO indicators light up on the display.
CD and AUTO
indicators
To deactivate the function, repeat steps 1 to 3 , and select
"OFF?" in step 2 .
The CD and AUTO indicators go off.
If you turn on the function while playing a CD
Recording will not begin. The function will work next time you
start playing a CD.
CD AUTO REC
TU AUTO REC
CD AUTO
AAC 128
– 41 –
How CD Auto Recording actually works?
Recording automatically starts when you start CD play in
Normal play by pressing CD 3/8.
The HDD lamp lights in red, and the CD and AUTO
indicators start flashing on the display.
CD AUTO
REC
AAC 128
CD Auto Recording will be automatically canceled if—
• you turn off the unit
• you change the source
• you stop, skip, search, pause or eject CD
• you select a track number directly
• you deactivate CD Auto Recording
Recording will not be stored in "Library CD."
If you press 7 or 0 CD while CD Auto Recording is
performed
"PLEASE WAIT" may appear in the main display for a moment.
To change the information shown in the main display
while recording
Each time you press DISP/CHARA on the remote control,
the information in the main display changes as follows:
1
2
Clock
1 Current track number
2 Elapsed playing time
3 Remaining recording time in the HDD (counts
down about every 10 seconds), calculated based on
the current setting of the recording mode
4 Current recording mode
If you play a digitally duplicated CD-R or CD-RW
CD Auto Recording will not start. To record a disc of this type, use
the ordinary recording methods described on pages 43 and 44.
If the recording is not done correctly or a track is
skipped while it is being played
Use analog recording (see page 47).
Elapsed playing time
Track No.
3
4

Advertisement

Table of Contents
loading

Table of Contents