Storage Precautions - Honda GX120 Owner's Manual

HELPFUL TIPS & SUGGESTIONS
Engine Oil
1. Change the engine oil (see page 27).
2. Remove the spark plugs (see page 36).
3.
Pour a tablespoon (5- 10 cc) of clean engine oil into the cylinder.
4. Pull the starter rope several times to distribute the oil in the cylinder.
5. Reinstall the spark plugs.
6. Pull the starter rope slowly until1 resistance is felt and the notch on
the starter pulley aligns with the hole a t the top of the recoil starter
cover. This will close the valves so moisture cannot enter the engine
cylinder. Return the starter rope gently.
Align notch
on pulley
with hole at top of cover.
Storage Precautions
If your engine will be stored with gasoline
in the fuel tank and
carburetor,
it
is important to reduce the hazard of gasoline vapor
ignition. Select a well-ventilated storage area away from any appliance
that operates with a flame, such as a furnace, water heater, or clothes
dryer. Also avoid any area with a spark-producing electric motor, or
where power tools are operated.
If possible, avoid storage areas with high humidity, because that
promotes rust and corrosion.
Unless all fuel has been drained from the fuel tank, leave the fuel valve
lever in the OFF position to reduce the possibility of fuel leakage.
42