Honda GX120 Owner's Manual page 33

Honda engines
Hide thumbs Also See for GX120:
Table of Contents

Advertisement

SERVICING YOUR ENGINE
TRANSMISSION OIL CHANGE
(1/2 reduction transmission with centrifugal clutch)
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Please a suitable container below the transmission to catch the used
oil, then remove the filler capddipstick and the drain plug.
2.Allow the used oil to drain completely, then reinstall the drain plug,
and tighten it securely.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest
you
take Lased oil in a sealed container
to your local recyling center or service station for reclamation.
Do
not throw
it
in the trash, pour it on the ground, or down a drain.
3. With the engine in a level position, fill to the upper limit mark on the
dipstick with the same oil that is recommended for the engine (see
page 28). To check the oil level, insert and move the dipstick without
screwing
it
into the filler hole.
Transmission oil capacity: 0.53 US qt (U.50 !2,0.44 Imp qt)
I
NOTICE
I
Running the engine with a low transmission oil level can cause
transmission damage.
4. Screw in the filler cap/dipstick securely.
FILLER CAPIDIPSTICK
U
LI
LOWER LIMIT
DRAIN BOLT
'
30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx200Gx160

Table of Contents