Basic Recording - JVC HR-XVS44U Instructions Manual

32
EN

Basic Recording

Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
recording will resume automatically when power is restored
to the unit unless the unit's memory backup has expired.
pg. 32, 33, 36), the
OPERATIONS ON VCR DECK (cont.)
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The unit's power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Choose a program.
Press CH +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press SP/EP. The current setting appears on the front
display panel or TV screen. Press SP/EP again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold REC (7) and press PLAY (4) on the
Remote, or press REC (7) on the unit.
Video Calibration takes place at the beginning of both the
first SP and the first EP recording after inserting the cassette.
( pg. 35)
F
Pause/Resume recording.
Press PAUSE (9). Press PLAY (4) to resume recording.
You can select channel during the Record Pause mode.
G
Stop recording.
Press STOP (8). Then press EJECT (x) on the VCR deck
to remove the cassette.