JVC HR-XVS44U Instructions Manual page 12

12
EN
ON-SCREEN DISPLAY (VCR deck)
If you press DISPLAY on the Remote when "SUPERIMPOSE" is set to "ON" (
appear on the TV screen.
For On-screen display for DVD deck, refer to "Using the on-screen bar" (
A Operation Mode Indicators
B Tape Speed (SP/EP)
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. ( pg. 30) The
position of "q" in relation to
"0" (beginning) or "+" (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
Beginning
pg. 48).
D Index number
E Tape Remaining Time Indicator
F Counter Display
G Audio Mode Display
H SAP Indicator
I Stereo Program Indicator
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1 or L-1)
L "Cassette Loaded" Mark
End
To recall an indication
A Press DISPLAY.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press DISPLAY again to clear the display.
The RECORD/PAUSE indication remains on the screen.
INDEX (cont.)
pg. 77), various operational indicators
pg. 30
pg. 31
pg. 34
pg. 34
pg. 34