Reset Button; System Code Setting; External Antenna Sockets - Eton Satellit 750 Owner's Manual

EXTERNAL ANTENNA SOCKETS

The external antenna sockets are used to connect the SATELLIT 750 to
advanced performance antennas.
On the right side of the radio are the 50 Ohm BNC sockets for FM and
Shortwave. 50 or 75 Ohm coaxial cable can be used to feed the properly
designed antenna. To find antennas we recommend that you perform
a web search by typing 'FM antennas' or 'shortwave antennas' into an
Internet search engine.
There is also a black and red socket, labeled 500 Ohms, designed to work
with a high impedance Shortwave antenna, 300-600 Ohms, such as a
long wire antenna. Plug a long piece of wire, 10 to 35 meters or 30 to 100
feet, into the red socket and position it above ground, running in as much a
straight line as possible, not touching any other metal objects. If you do this
indoors, position the wire as close to windows as possible. Plug a 10 to 20
meter or 30 to 60 foot wire into the black socket and let it run on the floor
or ground. Or attach the black socket to a cold water pipe with as short a
piece of wire as possible.
On the rotateable AM antenna, at the top of the radio, is a socket for 50 or
75 Ohm plug-in AM antennas.
When using external sockets select EXTERNAL with the selector switch on
the right side of the radio. When using the internal antennas of the radio,
switch it to ANTENNA.
NOTE: always unplug all antennas that are mounted outside when a
lightning storm is predicted.
18
SATELLIT 750 OWNER'S MANUAL

RESET BUTTON

The reset button is located to the left under the TUNING knob. When the
unit is dead or seems to stop functioning properly, press the Reset Button
to reboot the unit. Stored memories and the alarm clock settings will not
be eliminated. After it's pressed the AM station spacing will have to be set
again for North America.
EMPTY COMPARTMENT ON BACK OF
THE RADIO
Use the small, empty compartment next to the battery compartment as
you wish.

SYSTEM CODE SETTING

To enter different system codes turn off the radio and perform a quick,
short press of the ENTER button. "_ _" appears on the upper right corner of
the display. Enter the system code as below, then push ENTER to confirm
the system code.
SATELLIT 750 OWNER'S MANUAL
19