Programming The Remote; Programming Without A Code - Panasonic CT-32HL42 Operating Instruction

REMOTE CONTROL OPERATION (MODELS
CT-32HX42
AND
CT=36#X42)
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the
component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with
or
without a code for the corn1 onent.
Default Modes For Remote Control
Determine the manufacturer of the component and look in the table for the code.
DBS (Preset)
[ Panasonic DBS
Codes
CABLE CABLE (Preset)
mm DVD, CD (Preset)
Panasonic D8S Codes
Panasonic
DVD
Codes
Programming With a Code
Procedure
.
Confirm that the external component is plugged in and operating.
*
Turn the component off.
ACTION
e
Press and CD 'OWER together, for at least 5 seconds.
.
Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
l
Enter the 3-digit component code using the Remote Control numeric keypad (0 w 9 buttons).
.
Press the Remote Control @
0
to test the component. If the procedure was successful, the component will turn on.
Helpful Hi.nts: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ramming Without A Code
This procedure searches all codes and is called the "sequence method."
.
Confirm that the external component is plugged in and on.
.
Turn the component off.
ACTION
.
Press and @ together, for at least 5 seconds.
0
.
Press appropriate component button on the Remote Control.
.
Press
VOL
) to move forward to the next code. Press 4
VOL
to move backward.
. Press the Remote Control
CD
POWER
to test the component. If the procedure was successful, the component will turn on.
Note: Repeat the above steps unM the component code is found. /t may take
many
attempts before the correct code
is found.
ACTION
0
After the code is found, press to store the code.
25
l