Subsidiary Settings; Mode Set (Hdd & Dvd Deck Only) - JVC DR-MX1S Instructions Manual

Mode Set
(HDD & DVD Deck Only)
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
HDD
ENTER
AUDIO
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 81 through 82), then follow the procedure below.
DVD VIDEO SET UP
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
The procedure below shows how to set the desired option of the
"2ND AUDIO REC" mode as an example.
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press w e to select "FUNCTION SET UP", then press t.
4
Press w e to select "REC/PLAY
SET UP", then press t.
5
Press rt to select "2ND
AUDIO REC", then press ENTER.
6
Press rt to select the desired
option, then press ENTER.
7
Press SET UP to complete the
setting.
CABLE/DBS
TV DVD
DVD
rtwe
SET UP
LANGUAGE SET
( pg. 21)
AUDIO OUTPUT
( pg. 81)
PARENTAL LOCK
( pg. 40)
DISC PLAY SET UP
( pg. 82)
HDD SET UP
( pg. 82)
DVD SET UP
( pg. 82)
DISC SET UP
( pg. 87, 88)
REC/PLAY SET UP
( pg. 82)
DISPLAY SET
( pg. 82)
VIDEO IN/OUT
( pg. 26, 83)
TUNER SET
( pg. 23)
STB SET
( pg. 24)
CLOCK SET
( pg. 22)
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
REC/PLAY SET UP DISPLAY SET VIDEO IN/OUT
XP MODE REC AUDIO DOLBY DIGITAL
2ND AUDIO REC OFF
JUMP TIME 15MIN
SET UP ENTER
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
8 DIGITAL AUDIO OUT — DOLBY DIGITAL/PCM / STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUTPUT] connector.
DOLBY DIGITAL/PCM
input connector of a Dolby Digital Decoder or an amplifier with a
built-in Dolby Digital Decoder.
STREAM/PCM
: Select this when you connect the digital input
connector of an amplifier with a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
PCM ONLY
: Select this when you connect the linear PCM digital
input of other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
This setting also functions when HDD is active.
If you watch or play back a title which contains multiple audio
languages, select "PCM ONLY" in advance and choose main or sub
audio with AUDIO.
8 ANALOG AUDIO OUT — STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO
: Select this when listening to conventional two-channel
stereo audio with the unit's [AUDIO OUTPUT] connectors
connected to a stereo amplifier/receiver or TV set, or in case you
want to record the audio from a DVD VIDEO disc to a Mini Disc,
etc.
DOLBY SURROUND
surround audio with the unit's [AUDIO OUTPUT] connectors
connected to an amplifier/receiver with a built-in surround
decoder or a surround decoder.
8 D. RANGE CONTROL — NORMAL / WIDE RANGE / TV
MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL
: Normally select this setting to activate this function.
WIDE RANGE
: Select this to deactivate this function when you
enjoy wide dynamic range program.
TV MODE
: Select this when you hear the sound through the TV's
speaker(s).
NOTES:
This function has no effect on programs other than that recorded in
Dolby Digital format.
This function does not work when Simulated Surround Effect is
activated. (
The effect of "NORMAL" and "WIDE RANGE" may not be different
depending on discs.
8 OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate
the unit to the connected A/V equipment.
STANDARD
: Normally select this setting.
LOW
: The output level of analog audio is lowered.
INITIAL SET UP

SUBSIDIARY SETTINGS

: Select this when you connect the digital
: Select this when listening to multichannel
pg. 38)
81
EN