JVC DR-MX1S Instructions Manual page 58

TIMER RECORDING ON HDD/DVD DECK
58
EN
ENTER
Check Programs
To check the whole list of programs
1
Press PROGRAM to access the program top screen.
2
Press rtw e to select "PROGRAM LIST", then press ENTER.
The details of a selected program appear on the top of the screen.
The daily program of a title is listed as one program.
To check the list of programs by date
1
Press PROGRAM to access the program top screen.
2
Press rtw e to select "CALENDAR LIST", then press
ENTER.
3
Press rt to select the desired date, then press ENTER.
Cancel And Change Programs
Repeat steps in "Check Programs" to select a program before
proceeding.
To cancel the program
1
Press rtw e to select "CANCEL", then press ENTER.
To modify the program settings
1
Press rtw e to select "MODIFY", then press ENTER.
2
Change the settings of the desired recording options as
required.
Refer to steps 4 – 13 in "Manual Timer Programming" (
To skip the weekly/daily programs to the next week/day
It is easy to temporarily cancel weekly/daily programs of a week/
day.
1
Press rtw e to select "PROGRAM SKIP", then press ENTER.
2
Press w e to select "SKIP", then press ENTER.
To save the titles of weekly/daily programs (HDD Deck Only)
Use this function to avoid overwriting titles of weekly/daily
programs of a previous week/day.
1
Press rtw e to select "TITLE SAVE", then press ENTER.
2
Press w e to select "SAVE", then press ENTER.
NOTE:
This function is available only when the remaining capacity of the hard
disc is sufficient.
CABLE/DBS
TV DVD
PROGRAM
rtwe
pg. 57).
When Programs Overlap Each Other
If "PROGRAM OVERLAPPED" appears, you have other programs
overlapping the program you have just made.
Confirm with the arrow on "MODIFY", then press ENTER. Program
Overlap list appears.
Example: Five programs
overlap each other.
1
Confirm the overlapping
programs. Overlapping programs
appear on the TV screen.
NOTE:
If you do not mind this overlap,
press PROGRAM to finish the timer
program setting. The program with
the lower program number will be recorded and the other one will not
be recorded correctly. If no changes are made for approximately 1
minute, the unit will return to the normal screen.
2
Press rt to select the desired program to be canceled or
changed, then press ENTER.
3
Perform "Cancel And Change Programs" (refer to left column).
NOTE:
When any overlaps remain after deletion and modification of programs,
Program Overlap list remains showing the conflicting programs. In such
a case, repeat the procedure above until the conflict is solved.
2
PROGRAM > CALENDAR PROG. (OVERLAP)
01/08/03 WED 10:30PM - 12:00AM DBS 100
GARDENING [EDUCATION] FR360
5 PROGRAM OVERLAPPED
SELECT PROGRAM TO MODIFY
SELECT WITH [ ]
THEN PRESS [ENTER]
10:30PM- DBS 100
PRESS [PROGRAM]
TO EXIT
9:00PM- L-1
D
9:30PM- DBS 210
W
10:00PM- TV 63
D
ENTER
PROGRAM
11:00PM- CATV 4
EXIT SELECT