Simulated Surround Effect - JVC DR-MX1S Instructions Manual

BASIC OPERATIONS ON DVD DECK
38
EN
0-9
CANCEL
ENTER
2
4
CLEAR
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/
SVCD and Audio CD).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
window appears under the selected item.
TITLE 99 CHAPTER 99
DVD-
VIDEO
3
Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
Press 1
Press 5
If you have specified a wrong selection,
Press RETURN on the remote control unit and repeat the above
procedures from step .
2
To clear the on-screen bar
Press ON SCREEN.
NOTES:
When "X" is displayed on the TV screen in step 3, you have selected
a point that exceeds the recording time of the disc.
Some DVD VIDEO discs do not contain time information, and it is not
possible to use the Time Search function. In such cases, "X" is
displayed on the TV screen as well.
This function is not possible for a Video CD/SVCD with PBC function.
CABLE/DBS
TV DVD
rtwe
6
ON SCREEN
", then press ENTER. The pop-up
EACH 0:00
CINEMA AUTO
Press 2
Press 0

Simulated Surround Effect

It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
"3D-ON" appears above the selected item and Simulated Surround
Effect is activated.
Each time you press ENTER, "3D-ON" appears and disappears
alternately.
TITLE 99 CHAPTER 99
DVD-
VIDEO
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press ENTER to clear "3D-ON" from the screen.
NOTES:
Simulated Surround Effect works correctly only when playing back a
title recorded in multichannels.
Simulated Surround Effect does not affect the DVD VIDEO bitstream
signal from the [DIGITAL AUDIO OUT] connectors.
When Simulated Surround Effect is activated, the settings of
"ANALOG AUDIO OUT" and "D. RANGE CONTROL" are disabled.
( pg. 81)
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
window appears under the selected item.
TITLE 99 CHAPTER 99
DVD-
VIDEO
3
Press rt to select the desired option, then press ENTER.
NORMAL
: Normally select this option.
CINEMA
: Suitable for a movie disc, etc.
SHARP
: Clearer, sharper-edged picture when viewing images with
lots of flat, same-colored surfaces such as cartoons.
SOFT
: Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
", then press ENTER.
EACH 0:00
3D-ON CINEMA AUTO
", then press ENTER. The pop-up
EACH 0:00
CINEMA AUTO