Sony KP-53XBR200 Service Manual page 49

Color rear video projector with ra-4 chassis
Table of Contents

Advertisement

[GREEN REGISTRATION ADJUSTMENT]
<GREEN CENTER ADJUSTMENT>
1. Select "GRN CENT" with the 1 and 4 keys on the remote
control.
2. Use the joystick key on the remote control and adjust the ver-
tical and horizontal section not possible in Main mode.
(See item 5 of "Setup for adjustment".)
GRN
CENT
<GREEN SKEW>
1. Select "GRN SKEW" with the 1 and 4 keys on the remote
control.
2. Adjust with the joystick keys on the remote control so that
there is no slope on the vertical and horizontal center line.
GRN
SKEW
<H-PHASE ADJUSTMENT(COHP, FIHP, TPHP)>
1. Select "COHP" with the 1 and 4 keys on the remote con-
trol and check that the data is "0".
2. Select "F1HP" with the 1 and 4 keys on the remote control.
3. Shift to Fine Adjustment mode with the 9 key on the remote
control.
4. Move the joystick key to increase the peak vertically in the +
direction to form the peak as shown below.
* The speed at which changes in the peak occurs
FIHP
is slow so increasing the data for the peak will
make it easier to see.
• Marker Movement
(A vortex shape as shown below appears when the 1 key
on the remote control is held down and when the vortex
reaches the upper right it again returns to the center of the
screen. Reverse this movement with the 4 key on the re-
mote control.)
5. Shift to Rough Adjustment mode with the [9] key on the re-
mote control.
6. Change the FIHP value with the joystick key so that the tip of
the peak is in the center of the screen as shown below.
FIHP
7. Select "TPHP" with the 1 and 4 keys on the remote control.
The marker will now appear so use the 1 and 4 keys on the
remote control to adjust to position the center of the marker
in the screen center.
8. Shift to Fine Adjustment mode with the 9 key on the remote
control and return the peak section data.
TPHP
<GREEN PINCUSHION>
1. Shift to Rough Adjustment mode with the 9 key on the re-
mote control.
2. Select "GRN PIN" with the 1 and 4 keys on the remote
control.
3. Adjust with the joystick keys on the remote control so that the
upper and lower horizontal lines changes from a crooked to
nearly a straight shape. (A slope on the line is okay.)
GRN
PIN
– 49 –
KP-53XBR200/61XBR200
RM-Y902
GRN
PIN
RM-Y902

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kp-61xbr200

Table of Contents