Sony KP-53XBR200 Service Manual page 26

SURROUND SURROUND can only be set when SPEAKER is set to ALL ON or L/R OFF.
a a a PRO LOGIC: Produces superb theater-like surround effects. Most effective a a
Customize
for programs encoded in Dolby surround.
surround sound
a 3 STEREO: Produces a dynamic three dimensional sound without using the a a
a a
effects based on
rear speakers. The sound of the rear channel is output from the front
the program's
speakers.
audio type
SIMULATED: Adds a surround-like effect to mono programs.
LIVE: Produces surround effects with the atmosphere of a concert hall.
GAME: Produces maximum audio impact. Most effective for video games.
OFF: Normal stereo or mono reception.
After selecting any surround mode, adjust the volume of each speaker so that
SURROUND
LEVEL the sound will be even and natural. (see "Adjusting the speaker volume for
customized surround mode" on page 40)
Speaker volume
adjustment for
surround modes
Adjusting Your SET UP (menus) (continued)
Adjusting the Speaker
Volume for Customized
Surround Mode
After you set SURROUND to any mode,
adjust the volume of the front, center and rear
speakers to the same level so that the
projection TV's sound will be even and
natural. For aPRO LOGIC and a3
STEREO, adjust the speaker volume using the
test tone feature.
Adjusting the speaker volume
1
Select SURROUND LEVEL from the
AUDIO menu. (see pages 38 and 39)
aPRO-LOGIC
CENTER
REAR
BALANCE
TEST TONE : OFF
MENU
Move Select Exit
4 0
2
Move the joystick up or down to select the
speaker for volume adjustment and press
.
aPRO-LOGIC
CENTER
REAR
BALANCE
TEST TONE :
Move Select Exit
CENTER: Select to adjust the level of center
speaker. (not available for
SIMULATED)
REAR: Select to adjust the level of rear
speakers. (not available for
a3 STEREO)
BALANCE: Select to adjust the balance
between right and left speakers.
3
Move the joystick up, down, left or right
to adjust the volume level and press
4
Use the joystick to select other speakers
and to adjust the volume levels.
– 26 –
Adjusting the speaker volume
using the test tone
The TEST TONE feature makes it easier to
adjust the volume level. You can use this
feature for aPRO LOGIC and a3 STEREO
modes only.
OFF
1
With the SURROUND LEVEL window
open, move the joystick up or down to
MENU
select TEST TONE and press
2
Move the joystick up or down to select
ON.
A test tone will be output from each
.
speaker in sequence:
Front left nCenter nFront right nRear
To turn off the test tone, select OFF.
3
Follow steps 2 through 4 in "Adjusting the
speaker volume."
3 9
.
aPRO-LOGIC
CENTER
REAR
BALANCE
TEST TONE : ON
OFF
Move Select Exit MENU