Using Your New Projection Tv; Using Your New Projection Tv (Continued) - Sony KP-53XBR200 Service Manual

Using Your New Projection TV

Setting Up the Projection TV
Automatically
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels. The AUTO SET UP
screen will appear every time you turn on the
projection TV until you perform AUTO
PROGRAM.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually.
(see "Using the CHANNEL SET UP menu" on
page 43)
Notes:
• Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
"AUX" does not appear next to the
channel number.
• Perform this function during the day, with
the antenna and/or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
• When you perform AUTO PROGRAM,
your CHANNEL FIX, ON/OFF TIMER,
and CHANNEL BLOCK settings will be
erased.
• When you perform AUTO PROGRAM, all
the settings in the VIDEO, ADVANCED
VIDEO and AUDIO menus are reset to the
factory settings.

Using Your New Projection TV (continued)

To perform AUTO SET UP again
• Press SET UP inside the drop-down panel
on the projection TV.
• Press CHANNEL +, CHANNEL – or
VOLUME + to select a language.
• Press VOLUME – to restore factory
settings ("CONTINUE TO AUTO
PROGRAM?" will appear on the screen.
Press CHANNEL+ to execute or
CHANNEL– to exit).
• Press SET UP to exit.
2 4
Using the buttons on the front panel of the
projection TV:
TV/VIDEO – VOLUME + – CHANNEL +
POWER
STEREO TIMER/STAND BY
1
Press POWER to turn on the projection
TV. Then press SET UP button inside the
drop-down panel on the projection TV.
The AUTO SET UP screen appears.
POWER
ENGLISH :
ESPAÑOL :
FRANÇAIS :
AUTO SET UP :
DEMO :
First please connect
the antenna.
Press [ SET UP ] to exit.
2
Press CHANNEL + to select English,
CHANNEL – to select Spanish or
VOLUME + to select French.
The screen will change to reflect your
choice.
– VOLUME + – CHANNEL +
ENGLISH :
ESPAÑOL :
FRANÇAIS :
AUTO SET UP :
DEMO :
Primero conecte la
antena.
Oprima [ SET UP ] para
salir.
For a DEMO of functions and menus, press
TV/VIDEO.
Adjusting the Convergence
Automatically (AUTO FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence. The AUTO FOCUS
feature allows you to adjust the convergence
automatically.
Using the AUTO FOCUS button inside the
drop-down panel on the projection TV:
Tip z
• It is recommended to perform AUTO FOCUS about
30 minutes after the projection TV is turned on.
S VIDEO
VIDEO L(MONO)-AUDIO-R SET UP
VIDEO 2 INPUT
– 18 –
3
Press VOLUME – to continue.
– VOLUME +
4
Press CHANNEL + to preset channels
automatically.
– CHANNEL +
[ CH + ]
[ CH – ]
[ VOL + ]
[ VOL – ]
[ TV / VIDEO ]
"AUTO PROGRAM" appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed. If the
[ CH + ]
[ CH – ]
projection TV receives cable TV channels,
[ VOL + ]
[ VOL – ]
[ TV / VIDEO ] CABLE is set to ON automatically.
Press AUTO FOCUS.
The cross pattern appears and auto
convergence works. It is completed when the
cross pattern becomes white.
AUTO FOCUS
Note:
• You will not be able to perform any other
functions until AUTO FOCUS has
completed its cycle.
CONTINUE TO
AUTO PROGRAM ?
YES : [ CH + ]
NO : [ CH – ]
AUTO PROGRAM
(continued)
2 3
AUTO FOCUS