Using The Audio Menu - Sony KP-53XBR200 Service Manual

Using ADVANCED VIDEO
M e n u
ADVANCED VIDEO
OFF
NR:
OFF
COLOR CORRECTION:
DC TRANSMISSION: OFF
Move Select Exit MENU
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the ADVANCED VIDEO
menu:
/ /
Display Highlight
MENU
To restore the factory settings
Press RESET on the remote control while the
ADVANCED VIDEO menu is selected.
Note:
• The items in the ADVANCED VIDEO
menu can be set separately from the
MODE settings of the VIDEO menu.
Adjusting Your SET UP (menus) (continued)

Using the AUDIO Menu

AUDIO
TREBLE
BASS
BALANCE
MTS : STEREO
SPEAKER : ALL ON
SURROUND : OFF
SURROUND LEVEL
Move Select Exit MENU
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the AUDIO menu:
/ /
Display Highlight
MENU
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
3 8
NR
Noise Reduction
COLOR
CORRECTION
Color Ratio
Adjustment
DC
TRANSMISSION
Black Level
Adjustment
Select
TREBLE
Sound Adjustment
}
BASS
Sliders
Sound Adjustment
BALANCE
Sound Adjustment
MTS
Enjoy stereo,
bilingual and mono
programs.
Select
SPEAKER
Custom selection
of audio output
source.
Select ON to reduce picture noise.
Select OFF to cancel the feature.
Select ON to emphasize reds and blues.
Select OFF to enhance skin tones (greens).
Select ON to automatically improve contrast ratio.
Select OFF to reproduce the black level with no compensation.
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
STEREO: Select for stereo reception when viewing a program broadcast in
stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception. (use to reduce noise during stereo
broadcasts)
Quick MTS access: Press MTS on your remote control to cycle through the
MTS options as follows: (STEREO b SAP b MONO b STEREO)
ALL ON: Select to listen to the sound from the projection TV speakers alone.
L/R OFF: Select to turn off the projection TV left and right speakers and listen to
the left and right channel sounds through a separate audio system's
speakers.
ALL OFF: Select to turn off the projection TV speakers and listen to the
projection TV's sound only through an external audio system's speakers.
CENTER IN: Select to use the projection TV center speaker as center speaker
when you connect an amplifier with Dolby Pro Logic decoder. (see
"Connecting an amplifier with Dolby Pro Logic decoder" on page 18)
– 25 –
3 7