Sony KP-53XBR200 Service Manual page 20

Using the White Labeled Buttons for Projection TV Operations.
Press repeatedly to step through available video inputs:
TV/VIDEO
TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4 and VIDEO 5
If you select SKIP as a VIDEO LABEL in the SET UP menu, your projection
TV will skip the video input you selected. (see "VIDEO LABEL" on page 49)
ANT
Press to change between the VHF/UHF input and the AUX input. (for
(AUX input) detailed connection information, see "Cable box and cable" or "Cable and
antenna" on page 3)
MTS
Press to cycle through the Multi-channel TV Sound (MTS) options.
(see "MTS" on page 38)
SYSTEM OFF Press to turn off the projection TV and all other equipment connected with S-
(green labeled
Link. (see "Using the S-Link/CONTROL S function" on page 19)
button)
Using Your New Projection TV (continued)
Watching Two Programs at One Time — PIP
The Picture-in-Picture (PIP) feature allows
you to view two channels simultaneously,
one in the full size "main" picture and one in
a smaller "window" picture.
In this feature you can move the location of a
window picture as you like.
The symbol "b" or "B" The symbol "≥"
indicates which picture's indicates which
TV channel or input picture's sound is being
source can be changed. received.
TV channel or input-
Main source mode for the
6
picture main picture (It will
dim about 3 seconds
later.)
10
TV channel or input-
source mode for the
window picture (It
will dim about 3
Window
seconds later.)
picture
2 8
Using the Yellow Labeled Buttons for PIP Operations.
Press to display a window picture.
Each time you press, the picture size will change (1/4 n1/9 n1/16).
Press (OFF) to remove the window picture.
POSITION
Press to move the location of the window picture (counterclockwise)
around the main picture.
Press to allow you to alternate, between the main picture and the window
picture, the picture for which you can change the TV channel or video
ACTIVE
source using the white labeled buttons below. The symbol "b" (or "B") will
appear, to indicate which picture's channel or input mode can be
changed.
To move the location of the window picture as you like, move and hold the
joystick in any direction and release it when the picture is in the desired
(white labeled location.
button)
TV/VIDEO
Press repeatedly to step through the available video inputs for the picture
on which the symbol "b" (or "B") is displayed. (see "TV/VIDEO" on page
(white labeled 27)
button)
– 20 –
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
2 7