Video Capture; Capturing Video Images - JVC 0397MKV*UN*YP Instructions Manual

24

CAPTURING VIDEO IMAGES

There are three capture modes available: Step by Step, Program and Interval. The latter two
modes are available only when connected to a JLIP compatible video source unit. Step by Step
Capture mode must be used to capture images from a video source unit with no JLIP connector.
Image data flow
Video source
unit
When storing images on a 2HD disk,
• One image saved in the bitmap data format can be stored on one disk.
• About 28 images saved in the JPEG format can be stored on one disk.
This is the case when using floppy disks formatted for 1.44 MB.
Video signal
Full image
(with a resolution of 640 x 480
pixels)
2 types of full size images
• Bitmap format Approx. 900 kB
• JPEG format Approx. 50 kB
(images are stored on a hard disk or the like)

VIDEO CAPTURE

GV-DS1
(Image stored in video memory)
PC
NOTE:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image (640 x
480 pixels) is displayed only after vieo
data transfer is finished.
Index image
(with a resolution of
80 x 60 pixels)