Adjusting The Gap Between The Stored Edit-Start Point In The Computer And The Dubbed One In The Recording Deck - JVC 0397MKV*UN*YP Instructions Manual

64
Adjusting the gap between the stored edit-start point in the computer and the
dubbed one in the recording deck
During dubbing, the beginning of the scene stored in the computer can be missed or the scene
prior to the transition you chose for the edit-start point can be dubbed into the recording deck.
When these cases occur, adjust the gap for more accurate editing.
CHECK EDIT-START TIMING
1
After dubbing (
dubbed scene.
ACCESS "PAUSE TIME CORREC-
2
TION" DIALOG BOX
Choose "Pause Time" from "File" on the
MOVIE PLAYER window.
•The "Pause Time Correction" dialog box
appears.
ENTER VALUE
3
To adjust the edit-start timing, enter a
new value from 0.00 sec. to 2.60 sec.
When the scene prior to the transition
you chose for edit-start point is dubbed:
Enter a smaller value than 1.30.
When the beginning of the scene stored
in the computer is missed:
Enter a larger value than 1.30.
•Factory preset is 1.30 sec..
MOVIE PLAYER
File File Edit Video Printer Help
New Ctrl+N
Drop
COUNTER
Open Ctrl+O
POWER
ON OFF
Save Ctrl+S
Save As... Ctrl+A
PROGRAM PLAYBACK
ID Change
SCENE CUT IN
Device Change
Name Change
01 00:01:30:12F
Pause Time... 02 00:07:15:21F
03 00:15:50:11F
Open VCR Control Window
Close Serial
Initialize
Counter Reset
ELAPSED TIME
Exit
pg. 52), play back the
00:00:01:20F ID 06 FILE travel
MEMO Europe Tour
SCENE START
CUT OUT
00:03:27:14F
00:10:40:18F
00:20:33:10F
00:10:04:28F
IN/OUT
ADVANCED OPERATIONS
DETERMINE VALUE
4
Click "OK".
•This value is stored in the computer.
CHECK EDIT-START TIMING
5
AGAIN
To check the corrected edit-start timing,
dub the stored scenes and play them
back.
NOTE:
Even if the edit-start timing is adjusted, there
can be a slight margin between the adjusted
edit-start point and the dubbed scenes' one.
Pause Time Correction
Type in the value from 0.00(sec) to 2.60(sec),
MODE
to adjust pause time during editing.
STILL
PLAY
SEARCH
SLOW
FF
REW
Pre-start time = 1.30
OK CANCEL
(cont.)
(sec)