Controls And Connectors - JVC 0397MKV*UN*YP Instructions Manual

CONTROLS AND CONNECTORS

The controls and connectors marked
Camcorder is attached. For details of its operation, read the camcorder instruction manual.
* Stop button
* Rewind button
* Fast forward button
* MULTI connector
• The Docking Station can be connected with
the GR-DVM1 through this connector.
Never touch it with your hand or hit it with
a hard object; if the pins are damaged, the
connectors will become unusable due to
contact failure.
* S2 (Video) output jack
•Outputs the S-VIDEO signal.
(Also compatible with S1 and S2
connectors.)
DC input jack
* Video output jack
* Audio output jack (Left)
* Audio output jack (Right)
Capture input (EXT.)/printer connector
p. 13
•Connect with the video output (stored image output) of the optional video printer. Even
when a TV is not connected to the video printer, this connection allows you to see the
images output from the video printer on the LCD screen while printing.
•The date and timecode are not shown on the LCD screen. If you want to print out the date
together with the images, connect a TV to the video output connector of the video printer
and operate it by referring to the TV screen.
•It is also possible to capture images from video equipment other than the GR-DVM1by
connecting the equipment to this connector. To make this operation possible, also attach
the GR-DVM1 and set its power switch to record mode without loading a tape.
can be used only when the GR-DVM1 Digital
*
* Play button
p. 13
* Pause button
* Edit start button
* Lock lever
* Unlock button
* Digital jack
• Connect to the computer's
RS-232C terminal (COM
port).
JLIP jack
(JLIP: Joint Level Interface Protocol)
•Connect to a JLIP-compatible
comcorder or VCR to control it from
the computer.
* DC output jack
•For dealer use.
* Edit jack
11
p. 13
p. 13
* Remote control sensor
•Receives the remote
control signals for the
attached Camcorder.