Subaru 2002 IMPREZA Service Manual page 2838

INSTRUMENTATION/DRIVER INFO
C: DISASSEMBLY
CAUTION:
Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
1) Disengage the claw (F) to remove case (B) from back cover (A).
2) Disengage the claw (G) to remove meter glass (E), reflector (D), and window plate (C) from inner case.
3) Pull up the claw (A) in portion (B) of combination
meter printed circuit (C) with combination pliers.
Push out the speedometer and tachometer assem-
bly (D) and fuel gauge and water temperature
gauge assembly (E) using hole (F).
4) Pull up the claw in center of combination meter
printed circuit (C), and remove the printed circuit
from case (G).
COMBINATION METER ASSEMBLY
BO0015
IDI-16
1. BULB REPLACEMENT
(1) Tachometer
(2) Speedometer and tachometer
(3) Turn RH
(4) HI-beam
(5) Speedometer
(6) POWER
(7) Turn LH
(8) Fuel gauge
(9) Temperature gauge
(10) LCD (Outside temperature indicator)
(11) LCD (Odometer and tripmeter)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
BO0014
BO0016