Using The Confirmation Screen; Storing Channels Manually - JVC PU30425 Instructions Manual

USING THE CONFIRMATION SCREEN

1
4
NUMBER
7
PUSH JOG
6
q
STORE
2
2 3
5 6
8 9
0
OK

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.
ACCESS CH. SET MODE
MENU
1
Press and hold CH SET for more than 2 seconds. The
Ch. Set Mode menu appears.
SELECT MODE
2
Press PUSH JOG %fi to select "MANUAL CH SET",
then press OK. The Confirmation screen appears.
SELECT POSITION
3
Press PUSH JOG % fi
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "21" appears blinking to the right of "CH".
Press the NUMBER keys to input the preset number of
the channel you want to store.
Although "CH" is set to "21" when the Manual Ch. Set
screen appears, to store channel 21, you must select
"21" using the NUMBER keys.
For fine tuning adjustment, press PUSH JOG
the item under "CH" begins blinking, then press
PUSH JOG% fi . While tuning, "F+" or "F–" appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK or STORE, and the Confirmation screen appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press CH SET.
To input the station name, see page 43.
To change positions, see page 42.
41
until an open position in
until