Using The Confirmation Screen; Storing Channels Manually; Delete A Channel; Change Station Channel Position - JVC HR-J238E Instructions Manual

USING THE CONFIRMATION SCREEN

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.
ACCESS CH. SET MODE
MENU
1
Press and hold CH SET for more than 2 seconds. The
Language screen appears. Press OK. The Ch. Set Mode
menu appears.
SELECT MODE
2
Press PUSH JOG%fi to select "MANUAL CH SET",
then press OK. The Confirmation screen appears.
SELECT POSITION
3
Press PUSH JOG % fi
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "02" appears blinking beneath "CH".
Press the NUMBER keys to input the channel number
you want to store.
Although "CH" is set to "02", when the Manual Ch.
Set screen appears, to store channel 02, you must
select "02" using the NUMBER keys.
For fine tuning adjustment, press PUSH JOG
the item beneath "CH" begins blinking, then press
PUSH JOG%fi. While tuning, "F+" or "F–" appears.
If necessary, to change the band between CH(regular)
and CC(cable), press PUSH JOG
blinking, then press PUSH JOG %fi to select the
band.
When storing a channel that sends scrambled
broadcasts, press PUSH JOG
blinks, then press PUSH JOG%fi to set "DECODER"
to "ON" ("OFF" is the default setting).
ENTER NEW CHANNEL
INFORMATION
5
Press OK or STORE, and the Confirmation screen
appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press CH SET.
To input the station name, see page 30.
To change positions, see "Change Station Channel
Position" (at right).
When Receiving A Scrambled Broadcast
Make sure that the AV2 SELECT switch is set to "DECODER"
( pg. 4).
1– Perform steps 1 and 2 above.
2– Press PUSH JOG%fi to select the position of the
channel broadcasting the scrambled programmes, then
press OK three times.
until an open position in
until
until CH or CC is
until "DECODER"
3– Press PUSH JOG until "DECODER" begins blinking, and
set it to "ON" by pressing PUSH JOG%fi.
4– Press OK to access the Confirmation screen.
Repeat steps 2 – 4 for each additional channel.
5– Press CH SET.
Perform steps 1 and 2 of the previous procedure to access
the Confirmation screen before continuing.

Delete A Channel

SELECT ITEM
1
Press PUSH JOG%fi
delete begins blinking.
DELETE CHANNEL
2
Press CANCEL.
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press CH SET.
Change Station Channel
Position
SELECT ITEM
1
Press PUSH JOG % fi
move begins blinking. Then press OK and the station
name (ID) and its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press PUSH JOG% fi
channel position, then press OK.
Example: If you moved the station in position 3 to
position 7, the stations originally in positions 4–7 each
move up one space.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press CH SET.
29
until the item you want to
until the item you want to
to move the station to the new