Emotiva Airmotiv 4s User Manual page 16

Positioning your airmotiv™ 4s monitors as stereo speakers
The Emotiva airmotiv 4s works beautifully as a full-range speaker in a small audiophile
two-channel system, or as a satellite speaker in a larger two-channel system with the addition of a
sub-woofer. When choosing optimum locations for speakers in an audiophile home stereo system,
the goal is usually to optimize the frequency response and imaging.
Mount your airmotiv 4s speakers on separate stands, or using brackets if possible. Locating
•
your speakers away from the front wall will usually result in better imaging and frequency
response. Placing them directly on a (sturdy) wall-mounted shelf may also produce
satisfactory results. If possible, mount your airmotiv 4s speakers upright (with the high-
frequency transducer on top), vertically (not angled upwards or downwards), with the middle
of the front baffle at approximately the same height as the listener's seated head height, and
toe in each speaker so the front is directly facing towards the listener's head.
Locate your airmotiv 4s speakers so that the distance between them is approximately the
•
same as the distance between each speaker and the listener's head (the speakers and the
listener should form an equilateral triangle).
• In larger rooms, or if you wish to optimize speaker performance for several listeners or a wide
listening area, mounting the speakers with no toe-in will result in a wider sweet spot with a
slightly wider soundstage.
Listener
Typical stereo speaker placement
Page 12