Specifications - Emotiva Airmotiv 4s User Manual

Specifications

Frequency Response:
52 Hz to 27 kHz +/- 3 dB.
Input Connectors:
One unbalanced (RCA).
One professional balanced (XLR).
Driver complement:
airmotiv™
One 26 x 32 mm high-frequency transducer.
airmotiv™
One 115 mm (4.5 inch) low-frequency transducer.
Bass Alignment: Single rear-oriented port with linear taper .
Amplification:
High-frequency amplifier: 25 watts RMS; S/N > 90 dB; THD+N < 0.05% @ 15W, 10 kHz.
Low-frequency amplifier: 25 watts RMS; S/N > 90 dB; THD+N < 0.05% @ 20W, 100 Hz.
Crossover:
Precision multi-pole phase compensated fully active crossover.
Crossover frequency: 2700 Hz.
Adjustments and Calibrations:
HF gain, LF gain, and overall gain calibrated to standard within 1.0 dB.
High frequency adjustment: 4 kHz turnover frequency; 0 (calibrated), +2 dB, -2 dB @ 20 kHz.
Low frequency adjustment: 150 Hz turnover frequency; 0 (calibrated), -2 dB, -4 dB @ 20 Hz.
Power Source:
120 VAC 50/60 Hz +/- 10% or 230 VAC 50/60 Hz +/- 10%.
IEC standard removable power cord.
Fuses:
120 VAC 50/60 Hz: 5mm x 20mm; 1A Time Delay.
230 VAC 50/60 Hz: 5mm x 20mm; 0.5A Time Delay.
Size and Weight:
Size (each): 9.5" high x 6.25" wide x 7.5" deep (242 mm x 160 mm x 191 mm).
Size (boxed): 11.5" high x 11.5" wide x 14" deep (293 mm x 293 mm x 356 mm).
Weight (packaged): 13.7 pounds (6.3 kg).
Weight (net): 10.7 pounds (4.9 kg).
Mounting:
Bottom mounting points for use with our (optional) mounting brackets;
(two holes with threaded metal inserts; 6 mm x 1.0 thread;
spaced 1.375" apart; 2.625" from the front panel).
Page 23