Quick Start - Emotiva Airmotiv 4s User Manual

Quick Start

To get the most from your Emotiva airmotiv™ 4s powered monitors, we strongly urge you to read
the entire manual. If you just can't wait to hear how great your airmotiv 4s powered monitors
sound, this section will cover the basics you need to get started.
Find a secure location for your airmotiv 4s powered monitors.
•
Verify that the airmotiv 4s monitors you received are set for the correct operating voltage for
•
your location (The AC line voltage that is currently selected is visible in the window on the
AC Line Voltage switch. If necessary, use a pointed object or small screwdriver to move the
switch to the correct setting.)
NOTE: If you change the voltage setting, you will also have to replace the fuse with one of the
correct value. Correct values are: 120 VAC - 1A Time Delay / 230 VAC - 0.5A Time Delay.
Plug your airmotiv 4s powered monitors into grounded AC electrical outlets. If you use a
•
different power cord or extension cord, use only a three-prong grounded type.
• Connect a signal source to either the unbalanced (RCA) or balanced (XLR) input on the rear
panel of each airmotiv 4s monitor. (We recommend using a signal source with a variable
output level.)
Turn on the Power switch on the rear panel of each airmotiv 4s.
•
• Turn up the volume on your source and enjoy the music.
While you're enjoying your airmotiv 4s monitors, it would be a great time to read the rest of the
manual to learn more about them.
Page 8