Quick Start - Emotiva Airmotiv 6 Owner's Manual

Quick Start

To get the most from your Emotiva airmotiv powered monitors, we strongly urge you to
read the entire manual. If you just can't wait to hear how great your airmotiv powered
monitors sound, this section will cover the basics you need to get started.
• Find a secure location for your airmotiv powered monitors.
• Verify that the airmotiv monitors you received use the correct operating voltage
for your location (the AC line voltage may be changed using the AC Line Voltage
Selector switch on the rear panel).
• Verify that the front panel Level control on each airmotiv is in the calibrated (fully
clockwise) position.
• Plug your airmotiv powered monitors into grounded AC electrical outlets. If you use
a different power cord or extension cord, use only a three-prong grounded type.
• Connect a signal source to either the unbalanced (RCA) or balanced (XLR) input on
the rear panel of each airmotiv monitor. (We recommend using a signal source with
a variable output level, as this is much more convenient than having to adjust the
level on the speaker itself.)
• Turn on the Power switch on the rear panel of each airmotiv.
• Enjoy the music.
While you're enjoying your airmotiv monitors, it would be a great time to read the rest
of the manual to learn more about them.
Page 8