Get Started - Philips AVENT SCD485 User Manual

Baby unit (Fig. 2)
a
• Press to turn the baby unit on or off
b on
• In green: The baby unit is turned on.
c Microphone
d
• In green: The baby unit is turned on.
• In red flashing: The batteries are low in
power.
e Connector for the supplied AC/DC
adapter
f Lid of battery compartment
g Four 1.5 V R6 AA batteries (not included)
h 1 channel 2
• Switch to Channel 1 or Channel 2
i Battery compartment
j AC/DC adapter, with the same type as
the one for the parent unit

4 Get started

You can connect the parent unit or the baby
unit to the mains or insert batteries to operate
it. For added reassurance, insert batteries to
guarantee a backup in case of power supply
failure. If you use rechargeable batteries, make
sure that you charge them separately.
To set up the baby unit:
1
Before you connect the baby unit to the
mains socket, remove the lid of the battery
compartment.
2
Insert four 1.5V R6 AA batteries with the
correct polarity (+/-) as indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the baby
unit and to the mains socket.
To set up the parent unit:
1
Follow the same procedure as you do to
set up the baby unit.
EN
9