Table of Contents
Advertisement
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• "Vol Adj" setting is required for each source
except FM. Before starting "Vol Adj," select an
appropriate source for which you want to make
an adjustment.
1
Select the item you want to adjust.
Fad (Fader)
Bal (Balance)
Canceled
Indication
Fad*
1
Adjust the front
and rear speaker
balance.
Bal
Adjust the left
and right speaker
balance.
Vol Adj*
2
Adjust and store
the input level
of each source.
*
1
If you are using a two-speaker system, set the fader
level to "00."
*
2
By adjusting the input level to match it to the FM
sound level, you will not need to adjust the volume
level each time you change the source. This
adjustment is memorized for each source except
FM.
20
The next-step-operation
buttons start flashing.
Each time you press SEL
(select), the adjustable items
change as follows:
Vol Adj
(Volume Adjustment)
Canceled
To do:
Range
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
–12 (min.)
|
+12 (max.)
2
Make adjustments.
• To adjust fader and balance—Fad, Bal:
You can make these two adjustments at
the same time, by referring to the
indication on the display.
• Press 5 (up) or ∞ (down)
• Press ¢
• To adjust the input level of each source
—Vol Adj:
to adjust the fader.
or 4
to adjust the balance.
To increase the level
To decrease the level
Advertisement
Table of Contents
