Launching With A Rs232/Rs485 Serial Connection - Bosch VG4 Series Manual

14 en | VG4 Firmware Updates via the CTFID
2.3.2

Launching with a RS232/RS485 Serial Connection

If using a RS232/RS485 serial connection, use the following instructions to launch the CTFID
software.
1.
2.
3.
\
4.
5.
6.
NOTICE! The VP-RS2BLNX device is not available in the United States.
i
F01U096914 | 1.05 | 2008.10
Double-click the CTFID icon on the Windows Desktop.
Click Cancel to select an alternate interface.
Figure 2.3 CTFID Detect Device Screen
Select the Select an alternate interface radio button and click Continue.
Figure 2.4 Alternate Interface dialog box
Ensure that the Serial radio button is selected.
Select the COM Port that is connected to the DB9 connector.
Accept the default baud rate.
Note: If unable to connect, make sure the Gen4 AutoBaud setting is turned on.
Figure 2.5 Select Interface dialog box
Firmware Update Manual
AutoDome Modular Camera System
Bosch Security Systems, Inc.