Resume Playback; Selecting A View Angle; Selecting The Subtitle - JVC TH-C90 Instructions Manual

Advanced operations

Resume Playback

When Resume Playback is set to "ON" (see page
39) and you stop playback by the following
operations, the position where playback has been
stopped is stored. (The RESUME indicator lights
on the display window.)
• Turning off the power (See page 18.)
• Pressing 7 once
• Changing the source (See page 19.)
To start playback from the stored position
Press 3 (play button) or corresponding source button (DVD or USB
MEMORY).
• There may be a case when 3 (play button) does not work after
changing the source. In this case, select DVD or USB MEMORY
as a source.
• Pressing DISC (1-5) (with SHIFT pressed) on the remote control or
DISC (1-5) 3 on the center unit also resumes disc playback.
To clear the stored position
Press 7 again.
• Opening the disc tray with the playback disc or disconnecting the
USB mass storage class device also clears the stored position.
NOTE
• (For DivX) The beginning of a scene where playback has been
stopped may be stored.

Selecting a view angle

7 During playback of a disc containing multi-view
angles
When using the ANGLE button:
Press ANGLE with SHIFT pressed.
Example: The first view angle is selected out of 3 view angles
recorded.
Press ANGLE repeatedly with SHIFT
pressed, or press Cursor Y/5 to select
the desired view angle.
When using the on-screen bar:
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
Press Cursor 3/2 to highlight
Press ENTER.
Press Cursor Y/5 to select the desired
view angle.
Press ENTER.
Press ON SCREEN.
The on-screen bar disappears.
NOTE
• During DVD AUDIO playback, this feature is available only for the
video part.

Selecting the subtitle

7 During playback of a disc/file containing
subtitles in several languages
When using the SUBTITLE button:
Press SUBTITLE.
Example (DVD VIDEO): "ENGLISH" is selected out of 3
subtitle languages recorded.
Press Cursor Y/5 to select the desired
subtitle.
For DVD VR
• Pressing SUBTITLE activates the subtitles (subpictures)
regardless of whether the subtitles are recorded or not.
(Subpictures will not change if no subpicture is recorded.)
For SVCD
• An SVCD can contain up to four subtitles. Pressing SUBTITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
When using the on-screen bar:
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
Press Cursor 3/2 to highlight
Press ENTER.
Press Cursor Y/5 repeatedly to select
the desired subtitle.
Press ENTER.
Press ON SCREEN.
The on-screen bar disappears.
NOTE
. • To clear the subtitle, press SUBTITLE. Each time you press SUBTITLE,
subtitle appears and disappears alternately.
• Some subtitle or audio languages are abbreviated in the pop-up
window. See "The language codes list". (See page 37.)
• During DVD AUDIO playback, this feature is available only for the
video part.
• For DivX, you cannot operate this procedure using the on-screen bar.
See page 26 for button locations.
.