JVC TH-C90 Instructions Manual page 13

Connections
7 Assembling the front and surround speakers —
Front speaker Surround
(SP-THC60F) (2) speaker
(SP-THC60S) (2)
• Check the model name of each speaker from the label on the
rear to locate each speaker correctly.
Assembled speakers
With stand: Refer to steps 1 to
3.
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
When assembling a speaker without stand:
Speaker
Stand (or speaker
directly)*
* When assembling the speaker with the base plate, use the
A
screws .
Do not connect the power cord until all other connections have been made.
TH-C60
Base plate (4)
Stand (4)
or
Without stand: Refer to steps
2 and 3.
Speaker
Stand
Screw M5 x 40 mm (supplied)
A: Use these screws (M4 x
45 mm) when assembling the
speaker with the base plate.
Base plate
Screw M4 x 20 mm
(supplied)*
Red
Black
7 Connecting the center speaker —
Center speaker (SP-THC60C) (1)
Red
Black
For TH-C20, the front, surround and center speakers are
equipped with their speaker cords attached directly to their
speaker unit instead of having speaker terminals on their cabinet.
White
Black
You can route the speaker cord
by using speaker cord clamp
(supplied).
TH-C60
White
Black