Skip To The Beginning Of A Desired Selection; Skipping At About 5-Minute Intervals; Locating A Desired Title/Group Using Number Buttons - JVC TH-C90 Instructions Manual

Playback
Skip to the beginning of a
desired selection
7 Using x/4 buttons
7 For DVD VIDEO/DVD VR (chapter): During
playback
7 For VCD/SVCD (track): During playback
without PBC function
7 For DVD AUDIO/CD/MP3/WMA/JPEG/
ASF/MPEG-2/MPEG-1/DivX (track/file): During playback or
while stopped
Press x or 4 repeatedly.
NOTE
MP3/WMA/JPEG/ASF/MPEG-2/MPEG-1/
• When playing back an
DivX file, you can make operations using the file control display. (See
page 27.)
• This feature may not work for some discs/files.
7 Using number buttons on the remote control
7 For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
7 For DVD AUDIO (track):
During playback or while stopped
7 For VCD/SVCD (track):
During playback or while stopped without PBC function
7 For CD/MP3/WMA/JPEG/ASF/MPEG-2/MPEG-1/DivX
(track/file):
During playback or while stopped
Press number buttons (0-10, h10) to
select the desired number.
• For details on using the number buttons, see "How to use the
number buttons" below.
How to use the number buttons
To select 3: Press 3.
To select 10: Press 10.
Press h10, 1, then 4.
To select 14:
Press h10, 2, then 4.
To select 24:
Press h10, 4, then 0.
To select 40:
To select 114: Press h10, h10, 1, 1, then 4.
See page 18 for button locations.
Skipping at about 5-minute
intervals
You can skip within the file at about 5-minute intervals.
This is useful especially when you want to skip within a
long file.
7 During playback
Press Cursor 3/2.
Each time you press the button, the playback position skips to the
beginning of the previous or next interval. Each interval is about
5 minutes.
NOTE
• Intervals are automatically assigned from the beginning of a file.
• This feature is available only within the same file.
• This feature may not work for some discs/files.
Locating a desired title/group
using number buttons
7 During playback or while stopped
Press TITLE/GROUP.
"– –" is shown in the title/group display area
in the display window.
Example: During DVD VIDEO playback
While the display window shows "– –" ,
use number buttons (0-10, h10) to
enter the desired title or group
number.
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see "How to use the
number buttons" on the left column.
NOTE
• When locating a title of a DVD VR disc, the PG or PL indicator may
light on the display window.
• This feature may not work for some discs/files.