Playback; Basic Playback - JVC TH-C90 Instructions Manual

Playback

• The icon such as shows the disc formats or file types the
operation is available for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector
to AUDIO.
2 Press DVD or USB MEMORY.
The buttons described below are used on pages 21 to 25.
Number
buttons
Cursor
(3/2/Y/5)/
ENTER

Basic playback

7 To play a disc
Press the desired DISC (1-5)
0 on the center unit.
The system turns on and the disc tray comes
out.
Place a disc.
Label side up
Press DISC (1-5), with SHIFT pressed.
NOTE
• Up to 5 discs can be loaded.
• You can also start playback by pressing the following buttons:
– DVD or 3 (play button) on the remote control
Remote
control mode – DISC (1-5) 3 or 3 on the center unit
selector
• The system plays back available discs sequentially until you stop
playback or until the disc loaded on the DISC 5 tray reaches to the
end. However, when DVD VIDEO or DVD AUDIO is loaded in the
system, playback of the disc next to the DVD VIDEO or DVD
AUDIO will not start.
7 To play a file in a USB mass storage class device
Press USB MEMORY.
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
• For details on connecting a USB mass storage class device, see
"Connecting a USB mass storage class device". (See page 15.)
(play button)
7 When playing the following files...
• For MP3/WMA files
The file control display (see page 30) appears on the TV screen.
• For JPEG files
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 30) appears on the TV screen.
• For ASF/MPEG-2/MPEG-1 files
Pressing TOP MENU/PG or MENU/PL shows the file control
display (see page 30) on the TV screen during playback.
• For DivX files
During the readout time, "READING INDEX" may appear on
the TV screen.
Pressing TOP MENU/PG or MENU/PL shows the file control
display (see page 30) on the TV screen during playback.
NOTE
• When several types of files are recorded on a disc/device, select
appropriate file type on the setup menu. (See page 38.)
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
7 To pause playback
Press 8.
To continue playback, press 3 (play button).
7 To stop
Press 7.
When placing an 8 cm disc