Connecting The Satellite (Front, Center, Surround) Speakers - JVC TH-C90 Instructions Manual

Connections
Connecting the satellite (front,
center, surround) speakers
7 Assembling the front speakers —
Front speaker (SP-THC90F) (2)
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
Speaker
Direction of the base plate:
Make the short side front when fixing the base plate.
Speaker (front side)
CAUTION
• NEVER insert your finger in between the speaker and the base plate,
as it may get hurt.
Do not connect the power cord until all other connections have been made.
TH-C90
Base plate (2)
Base plate
Screw M4 x 30 mm
(supplied)
Red
Black
7 Connecting the center and surround speakers —
Center speaker
(SP-THC90C) (1)
Red
Black
To remove the speaker grilles:
The speaker grilles of the satellite speakers are removable.
The following procedure explains the removal of SP-THC90S's
speaker grille. You can remove speaker grilles of other speakers by
the same procedure.
Holes
Clear
Black striped
TH-C90
Surround speaker
(SP-THC90S) (2)
Clear
Black striped
Projections
Speaker grille