Default Setting; Job Box; Document Box/Removable Memory Settings - Triumph Adler DCC 2730 Instruction Handbook Manual

Default Setting (System Menu)

Document Box/Removable Memory Settings

The following settings are available for Document Box and removable USB memory.
• Registering / Editing Box ...8-40
•

Default Setting ...8-40

•

Job Box ...8-40

• Removable Memory (JPEG Print) ...8-40
• Quick Setup Registration ...8-41
Registering / Editing Box
Creates a new box, edits a box, or checks details of a box in the custom box, or deletes a box from the custom
box. For details, refer to Using a Custom Box on page 6-2.
Default Setting
Sets the time at which documents in the custom box are automatically deleted.
For details, refer to Setting the document deletion time on page 6-3.
Job Box
The following three operations can be done. For details, refer to each page shown below.
• Quick Copy/Proof and Hold Print Box (page 6-11)
• Repeat Copy Box (page 6-14)
Removable Memory (JPEG Print)
Sets the image size when you print JPEG files from USB memory.
Use the procedure below to print JPEG files.
8-40
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Removable Memory and then [Change] of JPEG
Print.
3
Select [Fit to Paper Size], [Image Resolution] or [Fit
to Print Resolution].
4
Press [OK].
OPERATION GUIDE