How To Adjust A Setting - Envision G917w User Manual

HOW TO ADJUST A SETTING

1. Press the Menu (Power) button to activate the OSD window. Press left, right,
up, down button to navigate through the functions. Once the desired
function is highlighted, press the Menu (Power) button to activate sub-
menu .
2. In sub-menu, Press up, down button to navigate through the functions.
Once the desired function is highlighted, press
change the setting. Press Menu (Power) button to return to superior menu.
3. If you want to adjust any other function, repeat steps 1-2.
4. To exit OSD windows, select "exit" icon on main OSD, then press the Menu
(Power) button .
5. Eco Mode hot key ( ) : Press the Eco key continuously to select the Eco
mode of brightness when there is no OSD ( Eco mode hot key may not be
available in all models).
6. Contrast adjustment hot key : When there is no OSD , press Contrast ( )
to active Contrast adjustment bar, press
7. DCR hot key ( ) : Press DCR key continuously to active or disable DCR
function when there is no OSD.
8. Source hot key : When the OSD is closed, press Auto/Source button will be
Source hot key function (Only for the models with dual or more
inputs) ,Press Source button continuously to select the input source
showed in the message bar , press Menu/Enter button to change to the
source selected.
Figure 5 The OSD Message
11
, button to button to
or to adjust Contrast.