Alphasmart Dana Wireless Setup Manual page 11

4. Tap OK in the 802.11b Preferences dialog. Tap OK in the
5. Tap the Connect button to connect to the wireless network
Using a Static IP Address
After completing steps 1- 6 for "Basic Wi-Fi setup on Dana Wire-
less" on page 2, continue with the following steps to use a static
(fixed) IP address.
1. If your network administrator told you to use a Static IP
6 Setting up Wireless Connectivity
Tip: If your access point needs to know the MAC
(Media Access Control) address for each device that
connects to it, you can use WiStat to get the MAC
address for your Dana Wireless. See "WiStat" on
page 9 for more information.
Profile Preferences dialog. Tap Done in the LAN Details dialog.
now.
address, tap on the Addressing selector field.
Tap here to select Static IP