Wi-Fi Hotsync Operations - Alphasmart Dana Wireless Setup Manual

Wi-Fi connection. Either your connection is incorrectly configured, or
you are out of range of the access point and not receiving a signal.
1. Tap the WiStat icon.
2. Tap the Ping Address selector field.
3. Tap the Target pick list, and select an address.
4. If the address you want is not in the Target pick list, select "Enter
Address" and then type in the appropriate address. Tap OK.
5. Tap the Ping button to Ping the address.

Wi-Fi HotSync Operations

You can also use your Wi-Fi profile (created when you completed the
Wi-Fi setup procedure described earlier) to perform HotSync
operations. The HotSync® process automatically synchronizes—that
is, exchanges and updates—data between Dana and the Palm Desktop
Dana Wireless Setup Guide 11