Table of Contents
Advertisement
Reduces power consumption
• POWER SAVE:
• STANDBY SAVE:
• POWER MANAGEMENT:
• AUTO POWER OFF:
SET UP
Note:
"POWER MANAGEMENT" and "AUTO POWER OFF" are effective during normal viewing (one picture screen) only.
Customizing the Input labels
This function can change the label of the Input signal to be displayed.
Notes:
While selecting a Input signal through Optional Terminal Board connected to Slot 1 to Slot 3, the Input label will depend
on each Optional Terminal Board.
INPUT LABELS for Slot 1 to Slot 3 and miniD-sub:
[Slot1 Input]
INPUT1/VIDEO1/COMPONENT1/RGB1/RGB1(digital)/PC1/DVD1/CATV1/VCR1/STB1
[Slot2 Input]
INPUT2/VIDEO2/COMPONENT2/RGB2/RGB2(digital)/PC2/DVD2/CATV2/VCR2/STB2
[Slot3 Input]
INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3
[PC (MiniD-sub) input] PC/COMPONENT/RGB/DVD/STB
30
When this function is turned ON, luminous level of the plasma display is suppressed, so
power consumption is reduced.
When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 13,14,15), so standby power of the set is reduced.
The unit power supply is turned ON or OFF depending on whether or not there is a signal
during PC input mode.
This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub)
terminal)
Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to select
"POWER SAVE"
"STANDBY SAVE"
"POWER MANAGEMENT"
"AUTO POWER OFF".
Press to select "ON" or "OFF".
ON
OFF
Press to exit from SETUP.
Press to select INPUT LABEL.
Press to change the INPUT LABEL.
SET UP
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
RGB1
SIGNAL
SCREENSAVER
POWER SAVE
OFF
STANDBY SAVE
ON
POWER MANAGEMENT
OFF
OSD LANGUAGE
ENGLISH
SET UP
AUTO POWER OFF
OFF
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUP
SET UP
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
RGB1
SIGNAL
SCREENSAVER
POWER SAVE
OFF
STANDBY SAVE
ON
POWER MANAGEMENT
OFF
OSD LANGUAGE
ENGLISH
1/2
US
(
)
2/2
1/2
US
(
)
Advertisement
Table of Contents
