Adjusting Picture Position/Size - JVC GD-V502U Instructions Manual

Adjusting PICTURE POSITION/SIZE

Adjusting screen
PICTURE
1 POS. /SIZE
2
During "VIDEO (S VIDEO)" and
"COMPONENT" input signal.
PICTURE POS./SIZE
NORMALIZE
NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
3
R
When the Position Left " " button is pressed.
H-POS
When the Position Left " " button is pressed.
H-SIZE
When the Position Left " " button is pressed.
V-POS
When the Position Left " " button is pressed.
V-SIZE
Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to
CLOCK PHASE
carry out adjustment.
(RGB/PC in Mode)
Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the
purpose of the public display or commercial gain may infringe on copyright laws.
Helpful Hint (
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
20
Press to display the PICTURE POS./
SIZE menu.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During "RGB" and "PC"
input signal.
PICTURE POS./SIZE
NORMALIZE
NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
Press to adjust POS./SIZE.
Press to exit from adjust mode.
N /
NORMALIZE
INPUT
SURROUND
VOL
N
PICTURE SOUND SET UP
MULTI
SWAP SELECT
PIP
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY
signals are memorized for 525 (480) / 60i ·
60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i
· 50i · 24p · 24sF, 1250 (1080) / 50i, 750 (720)
/ 60p · 50p each, and RGB signals are
memorized for each frequency.)
(2) If a "Cue" or "Rew" signal from a VCR or DVD
player is received, the picture position will
shift up or down. This picture position
movement cannot be controlled by the
PICTURE POS./SIZE function.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
When the Position Right " " button is pressed.
Normalization)
R
ZOOM
MOVE
Notes:
(1) Adjustment details are
memorized separately for
different input signal formats
(Adjustments for component