Color System / Aspect Auto; 3:2 Pulldown - JVC GD-V502U Instructions Manual

Plasma display monitor
Hide thumbs Also See for GD-V502U:
Table of Contents

Advertisement

SET UP for Input Signals

COLOR SYSTEM / ASPECT AUTO

Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input
signal mode.("SIGNAL [VIDEO]" menu is displayed.)
Mode
COLOR SYSTEM
ASPECT AUTO
(4:3)

3:2 PULLDOWN

When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) or
COMPONENT input signal.("SIGNAL [VIDEO]" or "SIGNAL [COMPONENT]" menu
is displayed.)
R
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal.
• 525i(480i) signal input during "COMPONENT" input signal.
34
Press to select the "COLOR SYSTEM" or
"ASPECT AUTO".
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set the COLOR SYSTEM to match that of the input signal.
If set to "AUTO", the COLOR SYSTEM is automatically selected from "PAL", "SECAM" and
"NTSC", but not from "M-NTSC". To view M-NTSC format pictures, you must manually
set to "M-NTSC".
AUTO
Set to "NORMAL" to view 4:3 images in an unchanged format when "ASPECT AUTO"
is selected. If you would like to view 4:3 images in Just format, set to "JUST".
Press to select 3:2 PULLDOWN.
Press to set ON/OFF.
Press to exit from adjust mode.
Function
PAL
SECAM
M NTSC
SET UP
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
RGB1
SIGNAL
SCREENSAVER
POWER SAVE
OFF
STANDBY SAVE
ON
OFF
POWER MANAGEMENT
OSD LANGUAGE
ENGLISH
Press
(ACTION) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER ( NTSC )
ON
COLOR SYSTEM
AUTO
3:2 PULLDOWN
OFF
ASPECT AUTO ( 4:3 )
NORMAL
NTSC
SET UP
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
RGB1
SIGNAL
SCREENSAVER
POWER SAVE
OFF
STANDBY SAVE
ON
POWER MANAGEMENT
OFF
OSD LANGUAGE
ENGLISH
Press
(ACTION) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER ( NTSC )
ON
COLOR SYSTEM
AUTO
3:2 PULLDOWN
OFF
ASPECT AUTO ( 4:3 )
NORMAL
[ COMPONENT ]
SIGNAL
3:2 PULLDOWN
OFF
1/2
US
(
)
1/2
US
(
)

Advertisement

Table of Contents
loading

Table of Contents