Connecting The Receiver - Sirius Satellite Radio SV1C SIRIUS One User And Installation Manual

PROTECTIVE MATERIAL
(RED SIDE)
ADHESIVE
STRIP
ANTENNA
CABLE
RUBBER ANTENNA
CABLE COVER/TAIL
peel the yellow protective material from the
adhesive strip and adhere the adhesive strip to the
rubber antenna cover/tail. Next peel the red
protective material from the adhesive strip and
press the rubber antenna cable cover/tail firmly into
place on the vehicle.
Double check that the location of the antenna and
rubber antenna cable cover/tail are correct, and
continue to press firmly down on rubber antenna
cable cover/tail for another 30 seconds.
Note: At room temperature (68 degrees), maximum
adhesion usually occurs within 72 hours. During this
10
ANTENNA period, avoid car washes and other contact with
(UNDERSIDE)
the antenna and rubber antenna cable cover/tail.
RUBBER ANTENNA
CABLE COVER/TAIL

Connecting the Receiver

Connect the antenna and cigarette lighter power
adapter to the Receiver to complete the installation.
The illustration below shows the location of the
antenna and power connectors on the Receiver.
Plug the cigarette lighter power adapter cord into
your vehicle's cigarette lighter, and turn the Receiver
On by pressing the power button. Once you have
verified that Receiver has powered on, you can
SV1C Receiver User and Installation Guide
VEHICLE
MOUNTING SURFACE