Lock Feature - Velocitek SC-1 Reference Manual

Lock Feature

The Velocitek SC-1 uses touch sensors to accept user input. Splashing water can trigger the touch
sensors. To prevent the device from being inadvertently controlled by splashing water the user can
enable lock features. When the device is locked, buttons are non-functional. There are two lock
features:

Speed Lock: The unit locks when the device speed exceeds the speed lock value (knots).
During speed lock, the unit will not allow the user to unlock the buttons.

Timeout Lock: The unit locks when the buttons have been inactive for a time period over the
timeout lock value (seconds). During a timeout lock, the unit allows the user to
buttons.
Speed lock enable, speed lock value, timeout lock enable and timeout lock value are all configurable in
device settings. The speed lock and timeout lock can be enabled independently.
The device will lock in response to the following events if timeout lock is enabled:

The timer is started

The timer is synchronized
When both lock features are disabled, the unlock indicator is never shown.
Getting Started 6
unlock the