Table of Contents
Advertisement
Updating Device Settings
User configurable device settings allow you to customize how your SC-1 works on the water.
Select Setup->Update Device Setting.
1
The following form will appear. Select the desired options on the form and click OK to update the
2
device settings. The below forms shows default device settings.
The device settings along with an explanation of each are listed below:
Compass Declination
When defined to the local declination the
north. Positive declination represents west and negative declination represents east. To reference
the compass measurement to true north, input 0 for compass declination. Default compass declination
is 0 degrees. When using a magnetic compass in conjunction with the SC-1, setting the compass
declination to the local declination is useful since both instruments will be referenced to magnetic north.
compass measurement
Using Control Center
will be referenced to local magnetic
69
Advertisement
Table of Contents
