1 display bezel
4 inside edge of bezel
Replacing the Display Bezel
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
2. Follow the instructions in
3. Starting near the hinges (near the Dell logo), use your fingers to snap the new bezel into place.
4. Replace the six M2.5 x 5-mm screws to secure the bezel.
5. Replace the six rubber bumpers to cover the screws.
6. Replace the display assembly (see
7. Replace the keyboard (see
8. Replace the hinge cover (see
2 rubber bumpers (6)
Preparing to Work Inside the Computer
Removing the Display
Replacing the Display
Replacing the
Keyboard).
Replacing the Hinge
3 M2.5 x 5-mm screws (6)
Bezel.
Assembly).
Cover).