Restricted Ip Addresses - Epson BrightLink Pro 1420Wi User Manual

• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, DNS server, WINS server,and Gateway Address as needed. When manually entering IP
Settings, you cannot use restricted IP addresses.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button
on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display.
11. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen
instructions to save your settings and exit the menus.

Restricted IP Addresses

Parent topic:
Related references
Projector Network Settings - Network Menu
Restricted IP Addresses
When manually entering IP Settings, you cannot use certain ranges of IP addresses:
Setting
IP Address
Subnet Mask
Gateway Address
DNS Server
Wired Network Projection
Restricted IP addresses
0.0.0.0
127.x.x.x
192.0.2.x
224.0.0.0 to 255.255.255.255
0.0.0.0
255.255.255.255
0.0.0.0
197.x.x.x
224.0.0.0 to 255.255.255.255
127.x.x.x
192.0.2.x
224.0.0.0 to 255.255.255.255
87