General Specifications; Troubleshooting - Kensence W-HDMI-50TR User Manual

Wireless hdmi transmission system
Table of Contents

Advertisement

General specifications

Video format support
Audio format support
RF communication system
Modulation
Image delay
Antenna
Operation frequency
Maximum transmission power
IR carrier modulation
frequency support
Power supply
Operation temperature

Troubleshooting

The link LED is not lit
Check power supply, or change positions of transmitter and receiver.
Can't establish link when adding a new transmitter
Reduce the distance (more than 1 meter at least) between the transmitter and
receiver units and then reconnect adapters.
Can't establish link when connecting a existing transmitter
1. Reduce the distance (more than 1 meter at least) between the transmitter and
receiver units and then reconnect adapters.
2. If it is not workable after step 1 , delete the source and re-add it.
The video LED is not lit
Check video source and HDMI cables.
The screen is blank
Check displayer video input channel, HDMI cables.
The IR repeater does not work
Check the internal IR port (external IR repeater) if it faces to video source IR port.
TV: 1080P, 1080i, 720P, 576p, 480p up to 60Hz
PC: up to 1920x1080Pixles up to 60Hz
PCM, DTS, DOLBY DIGITAL
MIMO
OFDM
Less than 1ms
High performance internal antennas
5.1GHz to 5.9GHz
15 ±2dBm
38KHz
AC input 100~240V, DC output 5V
0 ~ 40°C
7

Advertisement

Table of Contents
loading

Table of Contents