Page 1
Wireless HDMI transmission System (W-HDMI-50TR) User Manual V1.0 KENSENCE Transmitter(W-HDMI-50T) Receiver(W-HDMI-50R) Thanks for purchasing this wireless HDMI transmission system. Please read the following instructions carefully for your safety and prevention of properly damage. Do not use this product in the extreme hot, cold, dusty or humid environments.
Introduction Wireless HDMI transmission system runs at 5.8GHz operation frequency to deliver uncompressed HD video and audio 100 meters in open field. This system make wireless connection by using WHDI technology from HD media source devices, such as Blue-Ray player, PC, game console, set top box to display device, such as LCD TV, projector, etc, while keeps HD quality and no latency.
Getting started It is ideal when your media player is located in your living room, while you want to watch your full HD movies on your LCD, plasma or LED television in your bedroom. You need to install the wireless HDMI transmission system and enjoy it. Important! Before staring the installation, ensure the all devices are powered off.
Operation Once all equipments are powered on, it is shown by the blue link LED (refer to below table). Then system will initiate a wireless link, successful connection of the link will be shown by the blue link LED (refer to below table). This may take short time depending on the distance between the units and other environmental factors.
Press the remote control MENU button, HDMI displayer shows Wireless HDMI receiver unit (RX) menu You can choose “Modify Video Source Name” to change existing transmitter’s name with buttons. Add a wireless transmitter 1. Press ADD button of the remote controller facing receiver, displayer shows Press pair button of W-HDMI-50T until link LED fast flicker.
the link is successful. Select a wireless transmitter Press the remote controller SOURCE button facing receiver, displayer shows Use buttons to select a transmitter facing receiver, and then press the OK button. Delete a wireless transmitter: Press the remote controller DELETE button, HDMI displayer shows, Use ...
General specifications Video format support TV: 1080P, 1080i, 720P, 576p, 480p up to 60Hz PC: up to 1920x1080Pixles up to 60Hz Audio format support PCM, DTS, DOLBY DIGITAL RF communication system MIMO Modulation OFDM Image delay Less than 1ms Antenna High performance internal antennas Operation frequency 5.1GHz to 5.9GHz...