Getting Started; Installation - Kensence W-HDMI-50TR User Manual

Getting started

It is ideal when your media player is located in your living room, while you want to
watch your full HD movies on your LCD, plasma or LED television in your bedroom.
You need to install the wireless HDMI transmission system and enjoy it.
Important!
Before staring the installation, ensure the all devices are powered off.
The following steps are for an installation using HDMI equipment, if you using DVI
equipment you should substitute the HDMI cables for DVI to HDMI cables where
required.

Installation

 Place connect the stick transmitter (W-HDMI-50T) to HDMI port of your media
source device (90°HDMI converter is selectable, included).
 Place the receiver (W-HDMI-50R) near your HDMI displayer or projector,
connect your HDMI displayer or projector to the HDMI output port of the
receiver by using standard HDMI cable (included).
 Connect the stick transmitter USB port and PC USB port with USB cable
(included). *
 Connect the power adapter (included) to DC 5V input port of the receiver.
Once these steps have been completed, the system is ready to use.
* If your PC USB port doesn't have 800mA current output capability, connect power
adapter (included) to stick USB port.
3