Sony IPELA NSR-500 series Setup Procedure page 11

iSCSI Storage Device Setup Procedure
 Step 3. Registering and Adding iSCSI Disk to NSR-500
1.
2.
3.
4.
5.
6.
Issue: Jan/26/2009
Revised: 2013/10/17 ©2013 Sony Corporation
(NSR-500 Setup Menu)
Make sure that the NSR-500 and iSCSI Disk are being connected with the LAN cable.
Turn on the power of the iSCSI Disk.
After the power-on of the iSCSI Disk, turn on the power of the NSR-500.
Enter the user name and password in the logon screen and click [Administration Menu].
Select ［Setup Menu］ ->[Disk], and click [Select] button.
Select [Jumbo Frame Port Setting] and click [Select] button.
Select [LAN2] and click [Select] button.
Note
If you do not want to enable the jumbo frame setting at the iSCSI Disk side, select
[No Assign] here.
11
NSR-1000 series
NSR-500 Series